Bearing Cover for Andritz ACP Series Centrifugal Pump

$998.00

Product Brands: Andman

The Bearing Cover is made of EN-GJL-250 standard material, it’s used for ACP series centrifugal pumps and whole pump as the dust pump, white water pump and pulper pump.

Description

The Bearing Cover is made of EN-GJL-250 standard material, it’s used for ACP series centrifugal pumps and whole pump as the dust pump, white water pump and pulper pump.

The Bearing Cover for Andritz ACP Series Centrifugal Pump is a component designed to protect the bearings in the pump from external contamination, ensuring optimal performance and long service life. The bearing cover is made of high-quality materials such as cast iron or stainless steel and serves as a barrier between the bearings and the surrounding environment. It is specifically designed for use with the Andritz ACP series of centrifugal pumps used in waste paper pulp applications, but may also be used in other pump models depending on the compatibility of parts. The cover can be easily installed and removed for maintenance and repair purposes and can be customized to meet specific requirements and applications. With its reliable performance and durability, the Bearing Cover for Andritz ACP Series Centrifugal Pump provides an essential component in protecting the bearings and ensuring optimal operation of the pump.

ANDRITZ S & ACP Series Centrifugal Paper Pulp Pumps are available with closed, semi-open or open impellers with 3 vanes or 6vanes in a highly wear-resistant design. These pumps are suitable for conveying many different media. Depending on the impeller design, they can convey slightly contaminated and contaminated media with some solids and content up to consistencies up to 8%. S series and ACP series paper pulp pumps are wide used in the pulp and paper, mining, offshore, power, food, and chemical industry. Additionally, water supply, waste water treatment, desalination plants, and irrigation as well as drainage etc.

ACP Seires Pump Material:
The impeller and wear plates are standard made in duplex (1.4460). The pump housing is made in cast iron as well as in duplex 1.4460. For highly abrasive liquids we have the ability to perform the entire pump in superduplex 1.4517 material. We can even cure the latter material for an even higher wear resistance.

Impeller:
A fully open impeller, with three or six blades. The impeller is placed between two stationary wear plates to protect the pump housing.

Shaft Seal:
The pump shaft seal is made with a single mechanical seal following DIN24960 or double mechanical seal (tandem or back-to-back setup). The composition of materials are able to put together by customer specifications. Other options like a expeller seal is also possible.

ACP Series Pump Application:
The ACP pumps in many applications where clean to heavily contaminated liquids must be pumped. Especially in the paper mills, this pump is widely used, but also for seawater transport and applications in the general industry.

Andman® Paper Pulp Pump Used In Paper & Pulp Production System:

Paper and Pulp Production Pumping System

Andman®  Paper Pulp Pumps On-site Applications:

Tobee TSJ Paper Pulp Pump Applications